Provide the border-leaf IP (on
which the VRF is instantiated) for the VRF SR (Static Route) and VRF SR-BFD (Static
Route – BFD) configuration.
About this task
Follow this procedure to configure a
static route on tenant VRF.
Procedure
-
To create a static route on
tenant VRF, run the following command:
efa tenant vrf create --name <vrf-name> --tenant <tenant-name>
--ipv6-static-route-next-hop <border-leaf-ip, destination, next-hop, distance, metric>
--ipv4-static-route-next-hop <border-leaf-ip, destination, next-hop, distance, metric>
-
To update a static route on
tenant VRF, run the following command:
efa tenant vrf update –name <vrf-name> --tenant <tenant-name>
--operation <static-route-add|static-route-delete>
--ipv6-static-route-next-hop <border-leaf-ip, destination, next-hop, distance>
--ipv4-static-route-next-hop <border-leaf-ip, destination, next-hop, distance>
Example
The following example creates static
routes on tenant
VRF:
efa tenant vrf create --name VRF1 --tenant tenant1
--ipv6-static-route-next-hop BL1-IP,2000::/64,1001::2
--ipv6-static-route-next-hop BL1-IP,2000::/64,1002::2
--ipv6-static-route-next-hop BL2-IP,2001::/64,1001::2,4
--ipv6-static-route-next-hop BL2-IP,2001::/64,1002::2
--ipv4-static-route-next-hop BL1-IP,22.0.0.0/24,13.0.0.1,2
--ipv4-static-route-next-hop BL1-IP,22.0.0.0/24,13.0.0.2
--ipv4-static-route-next-hop BL2-IP,23.0.0.0/24,13.0.0.1
--ipv4-static-route-next-hop BL2-IP,23.0.0.0/24,13.0.0.2
